-
简体中文选择语言：
-
| 产品规格： | 标准规格 |
| 所属行业： | 仪器仪表 无损检测仪器 探伤仪 |
| 包装说明： | 纸箱 |
| 产品数量： | 0.00 个 |
| 价格说明： | 面议 |
 打印本页  添加收藏夹  点此询价
|
|
A603S-RB C603-RB保护面探头
奥林巴斯A603S-RB C603-RB保护面探头
上海楹点检测设备有限公司服务范围： 船舶及船用产品的超声探伤-UT；磁粉探伤-MT；渗透检测(PT)、射线探伤-RT、涡流探伤-ET等产品。公司承诺，所有商品保证原装正品，一年保修，终身维护！服务热线：151-210-77168/QQ:2639790836。
探伤仪配件：直探头，斜探头，连接线，探头线，保护膜，试块，耦合剂，双晶探头，表面波探头，小径管探头，小角度探头，水浸探头，非金属探头，可拆式探头，可变角度探头，窄脉冲探头、测厚探头
保护面探头
保护面探头是一种单晶纵波接触式探头，可与延迟线、保护膜或防磨保护盖一起使用。
Advantages:
Provides versatility by offering removable delay line, protective wear cap, and protective membrane
When the transducer is used alone (without any of the options), the epoxy wear face provides good acoustic impedance matching into plastics, many composites, and other low impedance materials
Cases are threaded for easy attachment to the delay line, protective membrane, and wear cap options
Applications:
Straight beam flaw detection
Thickness gaging
High temperature inspections
Inspection of plates, billets, bars, and forgings
标准保护面探头：
Standard Protected Face
Comfort Fit sleeves are designed to be easily held and provide steady grip while wearing gloves
Standard connector style Right Angle BNC (RB), may be available in Straight BNC (SB)
Delay line, protective membrane, and wear cap options sold separately from the transducer
Transducer Dimensions (in inches)
Nominal Element Size (A) (B) (C)
1.50 1.53 1.75 2.25
1.125
1.53
1.38
1.81
1.00 1.53 1.25 1.63
0.75 1.53 0.99 1.41
0.50 1.53 0.63 1.19
Transducer Configurator
Request a quote or purchase a transducer by selecting the item number.
Frequency (MHZ)
Nominal Element Size (mm)
Transducer Type
SearchReset
Frequency
(MHz) Nominal Element Size ACCUSCAN-S CENTRASCAN VIDEOSCAN
in. mm Part /
Item No. Part /
Item No. Part /
Item No.
0.5 1 25 A601S-RB
U8440001
V601-RB
U8442001
0.5 1.125 29 A691S-RB
U8440031
V691-RB
U8442031
0.5 1.5 39 A689S-RB
U8440029
V689-RB
U8442029
1 0.5 13 A603S-RB
U8440005
C603-RB
U8441002
V603-RB
U8442005
1 0.75 19 A614S-RB
U8440021
V614-RB
U8442021
1 1 25 A602S-RB
U8440003
C602-RB
U8441001
V602-RB
U8442003
1 1.125 29 V694-RB
U8442035
1 1.5 39 A692S-RB
U8440033
V692-RB
U8442033
2.25 0.5 13 A606S-RB
U8440011
C606-RB
U8441004
V606-RB
U8442011
2.25 0.75 19 A605S-RB
U8440009
V605-RB
U8442009
2.25 1 25 A604S-RB
U8440007
C604-RB
U8441003
V604-RB
U8442007
2.25 1.125 29 A697S-RB
U8440038
V697-RB
U8442039
2.25 1.5 39 A695S-RB
U8440037
V695-RB
U8442037
3.5 0.5 13 A682S-RB
U8440027
V682-RB
U8442027
3.5 0.75 19 A681S-RB
U8440025
V681-RB
U8442025
3.5 1 25 A680S-RB
U8440023
V680-RB
U8442023
5 0.5 13 A609S-RB
U8440017
C609-RB
U8441006
V609-RB
U8442017
5 0.75 19 A608S-RB
U8440015
V608-RB
U8442015
5 1 25 A607S-RB
U8440013
V607-RB
U8442013
10 0.5 13 A611S-RB
U8440019
V611-RB
U8442019
High Temperature Delay Line Options
Allows for intermittent contact with hot surfaces*
Improves near surface resolution
Contouring of delay lines provides better coupling on curved surfaces
Warm temperature delay lines (WTD) can be used for room temperature applications
Nominal
Element Size
Delay Line
Retaining
Ring
350°F max.
(175°C)
500°F max.
(260°C)
900°F max.
(480°C)
inches
mm
1.00
25
DRN-3
WTD-3-x
HTD-3-x
VHTD-3-x
0.75
19
DRN-4
WTD-4-x
HTD-4-x
VHTD-4-x
0.50
13
DRN-5
WTD-5-x
HTD-5-x
VHTD-5-x
*Recommended usage cycle is ten seconds maximum contact followed by one minute of air cooling. However, the transducer itself should not be heated above 122°F (50°C).
X = standard delay line lengths, available in 1/2" (13 mm), 1" (25 mm), 1-1/2" (38 mm). Specify at time of ordering.
Note: For the delay lines above, a room temperature material longitudinal wave velocity of 0.100 in/μsec ±0.005 in/μsec may be used as an approximation for basic calculations. This value should not be used for engineering design calculations.